REZNOR® RA150 Used Oil Fired Heater, 148000 Btu/hr, 118400 Btu/hr, 115 V, 43.4 kW, 34.7 kW, Baked-On Enamel

REZNOR® Used Oil Fired Heater, RA Series, 115 V, 15 A, 43.4 kW, 34.7 kW, 1/4 hp, 60 Hz, 148000 Btu/hr, 118400 Btu/hr, 2050 cfm Air Flow Capacity, 8 in Vent, 1.06 gph Fuel Consumption, #2 Fuel Oil, Waste Oil, Transmission Fluids Fuel, Finish: Baked-On Enamel, 50 deg F, 26-3/4 in H x 47-15/32 in W x 46-29/32 in D, Additional Information: 1050 rpm Motor Speed

REZNOR® model RA used oil fired heaters are available in four sizes with Btu inputs of 140000 to 500000. RA units are propeller fan type units. These units are designed to burn typical waste oils, up to 50 weight, transmission fluids and #2 fuel oil. All REZNOR® heaters are designed to facilitate installation and required maintenance procedures. Model RA unit heaters are CSA certified to UL standards and meet EPA requirements for onsite recycling of used oils.

• Air, atomizing-type burner
• Automatic, thermostat controlled operation
• Remote, metering fuel pumping system
• Electric spark ignition with electronic cad cell flame safety system
• Piston air compressor with replaceable filter
• Fan and limit controls
• High temperature limit control
• Terminal block wiring
• Built-in disconnect switches for pump and heater
• Permanently lubricated fan or blower motor with internal overload protection
• Operation hour meter
• Barometric draft regulator
• Backflow sensor
• Flexible fuel line and built-in tray for service to burner and nozzle, without disconnecting fuel line
• Large, easily accessible service panels designed to facilitate combustion chamber/heat exchanger maintenance
• Observation and draft sampling ports
• Oil supply line filter system with disposable strainer and dirty filter indicator gauge
• Individually adjusted, horizontal louvers
• Full safety fan guard
• Four-point hanger connections

Specifications