Skip to content
Malco® SS-SS42DT Blind Rivet, 1/8 in, 0.232 in L, 1/8 in Dia, 0.063 to 0.125 in Grip, Stainless Steel

Malco® SS-SS42DT Blind Rivet, 1/8 in, 0.232 in L, 1/8 in Dia, 0.063 to 0.125 in Grip, Stainless Steel

by Malco®
$95.76 - $95.76
$95.76
$95.76 - $95.76
$95.76

Malco® Blind Rivet, 1/8 in Size, 0.232 in Length, 1/8 in Dia, 0.063 to 0.125 in Grip Range, 1/4 in Head Dia, 0.032 in Head Height, 0.125 to 0.135 in Hole, 530 lb Tensile, 420 lb Shear Strength, Stainless Steel, Additional Information: Stainless Steel Mandrel

Malco® blind rivets provide a strong, secure connection between two or more sheets of material, that will not loosen with vibration. Blind rivet fasteners can be used where access is limited to only one side of the material to be fastened. Rivets require only a pre-drilled or pre-punched hole. The blind rivet is an assembly, consisting of a mandrel and an eyelet body. Mandrels are used only to set the rivet body and are then discarded. Mandrel is designed to break off at the crimp after pulling (setting) the rivet body. No operator skill is required to set blind rivets. Low rivet profile offers cosmetic advantages over screws.

  • Only require a pre-drilled or punched hole
  • Low rivet profile offers cosmetic advantages over screws
  • No operator skill is required to set blind rivets

Specifications

Grip Range 0.063 to 0.125 in
Tensile Strength 530 lb
Head Diameter 1/4 in
Diameter 1/8 in
Shear Strength 420 lb
Material Stainless Steel
Additional Information Stainless Steel Mandrel
Hole Size 0.125 to 0.135 in
Size 1/8 in
Head Height 0.032 in
Length 0.232 in
Availability:
Only 4 left!