Skip to content
Malco® SS46DT Blind Rivet, 1/8 in, 0.481 in L, 1/8 in Dia, 0.313 to 0.375 in Grip, Steel

Malco® SS46DT Blind Rivet, 1/8 in, 0.481 in L, 1/8 in Dia, 0.313 to 0.375 in Grip, Steel

by Malco®
Sold out
$67.00 - $67.00
$67.00
$67.00 - $67.00
$67.00

Malco® Blind Rivet, 1/8 in Size, 0.481 in Length, 1/8 in Dia, 0.313 to 0.375 in Grip Range, 1/4 in Head Dia, 0.032 in Head Height, 0.125 to 0.135 in Hole, 310 lb Tensile, 260 lb Shear Strength, Steel, Additional Information: Plated Steel Mandrel

Malco® blind rivets provide a strong, secure connection between two or more sheets of material, that will not loosen with vibration. Blind rivet fasteners can be used where access is limited to only one side of the material to be fastened. Rivets require only a pre-drilled or pre-punched hole. The blind rivet is an assembly, consisting of a mandrel and an eyelet body. Mandrels are used only to set the rivet body and are then discarded. Mandrel is designed to break off at the crimp after pulling (setting) the rivet body. No operator skill is required to set blind rivets. Low rivet profile offers cosmetic advantages over screws.

  • Only require a pre-drilled or punched hole
  • Low rivet profile offers cosmetic advantages over screws
  • No operator skill is required to set blind rivets

Specifications

Length 0.481 in
Additional Information Plated Steel Mandrel
Tensile Strength 310 lb
Hole Size 0.125 to 0.135 in
Diameter 1/8 in
Material Steel
Head Height 0.032 in
Head Diameter 1/4 in
Size 1/8 in
Shear Strength 260 lb
Grip Range 0.313 to 0.375 in
Availability:
Out of stock