Duro Dyne® 5057 Insulation Adhesive, Liquid, White, Bland, 5 gal, Pail
Duro Dyne® Insulation Adhesive, 5 gal Net Content, Pail, Liquid, White, Bland, 4 to 6 pH, 1.18 Specific Gravity, <5 g/L VOC, 1600 to 1800 cPs Viscosity, Applicable Materials: Metal, -40 to 200 deg F
Duct liner is typically attached to duct walls by two fastening methods, one with mechanical fasteners and the other with adhesive. Mechanical fasteners are utilized to prevent delamination of the liner while adhesives bond the liner to the metal ensuring that airflow can not intrude between the two materials. The choice of an adhesive is affected by several factors some of which are the method of application, acceptable dry time, solvent-type. Duro Dyne® WIT is a non-flammable water-based duct liner adhesive specifically formulated for spray, brush and roller coating application. WIT may be used for bonding low and high density duct liner or wrap to the interior or exterior of metal ductwork. Duro Dyne® WIT is formulated to work with Duro Dyne® adhesive application equipment that is GBAC, super Sprayfast, Mini-Sprayfast and Rollabond.
- Non-flammable in wet and dry state
- Can be applied by spray, brush or roller
- Non-toxic, 100% solvent-free
- Quick-grab to hold liner in place
Specifications
| Container Size | 5 gal |
| VOC | <5 g/L |
| pH Rating | 4 - 6 |
| Container Type | Pail |
| pH Range | 4 to 6 |
| Form | Liquid |
| Net Content | 5 gal |
| Odor/Scent | Bland |
| Applicable Materials | Metal |
| Temperature Rating | -40 to 200 deg F |
| Flash Point | >212 deg F |
| Specific Gravity | 1.18 |
| VOC Content | <5 g/L |
| Viscosity | 1600 to 1800 cPs |
| Color | White |