Duro Dyne® Rapit® 8372 Damper Regulator Set, 24 ga, Galvanized, Steel

Duro Dyne® Rapit® Damper Regulator Set, 24 ga, Steel, Galvanized, Spring Bearing

The Rapit® is an inexpensive, rattle-free regulator for quick installation on balance or splitter dampers. It is formed from rust-resistant, heavy gauge, galvanized steel and installs in seconds. The Rapit® will penetrate and secure to round or rectangular damper blades up to 24 ga steel. It has a fully retractable bearing of zinc alloy, threaded to accept a 5/16-18 wing nut and a handle that indicates the damper position. Its as easy-to-use as 1-2-3.

• Slip the bearing over the edge of the damper at the bearing line
• Lay the assembly on any firm surface and rap the prong with a hammer
• One-blow drives the prong through the damper blade, holding it securely to the damper
• When hit with a hammer, the prong will automatically form up tight by the anvil, which is built-into the bottom of the Rapit® bearing

Specifications