Duro Dyne® JFF Flexible Duct Connector, 1-3/4 x 3 in Nominal, Steel, Galvanized, 28 ga, Black

Duro Dyne® Flexible Duct Connector, JFF Series, 1-3/4 x 3 in Nominal, 15 A, 230 VAC, Excelon Fabric, 100 lb Tear Strength, 1/2 hp, 1/8 to 2 in Pipe Capacity, 38 rpm, 28 ga Gauge, Steel, Finish: Galvanized, Black, -40 to 180 deg F

All air duct installations for heating, cooling or ventilation are attached to mechanical equipment containing a fan or blower. Vibrations, noises and rattles resulting from operation of the fan or blower are transmitted into the metal ducts which carry the noises throughout the system. In order to isolate the vibration and noises to the source, an air-tight flexible joint, consisting of a fabric which is attached to sheet metal on both side, must be inserted between the equipment and the ductwork. This vibration isolator is called a flexible duct connector.

• Ridgid speed chuck
• Reversible 1/2 hp universal motor
• Recessed on/off/reverse switch
• Convert a 300 power drive to a portable threading machine
• Heavy-duty forward/off/reverse and integral foot switch
• Cam action turns with chuck rear centering device
• Two heavy-duty support bars
• 50 to 60 Hz single-phase universal reversible motor

Specifications