Skip to content
Caleffi DISCAL® 551 Series 551066A Air Separator, 1 in, Press, Brass

Caleffi DISCAL® 551 Series 551066A Air Separator, 1 in, Press, Brass

by Caleffi
Sold out
$442.00 - $442.00
$442.00
$442.00 - $442.00
$442.00

Caleffi DISCAL® Air Separator, 551 Series, 1 in Nominal, Press Connection, 150 psi, 32 to 250 deg F, Glycol Solution, Water Suitable Media, 50 % Maximum Percentage of Glycol, 10 gpm Flow Rate, Brass, 7-1/2 in H x 6-3/16 in W, Domestic/Import: Import

The DISCAL® air separator is used to continuously remove the air contained in hydronic circuits of heating and cooling systems. The air discharge capacity is very high. They automatically remove all the air present in the system down to micro bubble level with low head loss due to the special internal shape of the separator body. Flow direction of the DISCAL® air separator is bidirectional, flow in either direction is permitted. The circulation of fully de-aerated water enables the equipment to operate under optimum conditions, free from noise, corrosion, localized or mechanical damage. Micro-bubbles, fusing with each other, increase in volume (get larger) until they become large enough to rise to the top where they are automatically released.

  • Air separator with or without automatic check valve to mount to expansion tank on bottom thread
  • Stainless steel float guide pin and linkage
  • Glass reinforced nylon internal element
  • 1/2 in NPT female bottom thread
  • Air separation efficiency, up to 100% removal
  • Anti-rotation/anti-vibration pinned float, creates space between float and air vent wall to prevent float hang-up from debris or variations in separator installation orientation
  • Anti-corrosion coalescing mesh, constructed of glass filled nylon
  • More-resistant to dissolved oxygen and acidic fluids than plated metals
  • Corrosion-resistant, all components highly-resistant to hydronic chemical additives or unstable pH fluid
  • Large diameter chamber slows fluid flow dramatically
  • Combines with concentric, sharp edged mesh design to cause micro-bubbles to efficiently collect and coalesce
  • Highly effective automatic air elimination
  • Robust stainless steel float linkages - reliable float alignment even during turbulent conditions such as filling from bottom

Specifications

Domestic/Import Import
Dimensions 7-1/2 in H x 6-3/16 in W
Pressure Rating 150 psi
Series 551 Series
Maximum Percentage of Glycol 50 %
Connection Type Press
Nominal Size 1 in
Material Brass
Temperature Rating 32 to 250 deg F
Suitable Media Glycol Solution, Water
Flow Rate 10 gpm
Availability:
Out of stock