AireForce® KG7SD038D24B1 Gas Furnace, 115 V, 95 % AFUE, Upflow, Gas

AireForce® Gas Furnace, Series: KG7SD, 38000 Btu/hr Input, 115 V, 95 % AFUE, 60 Hz, 1 Stage, Upflow Configuration, NPT Connection Type, 1/2 in Connection, Gas, 34-1/2 in H x 17-1/2 in W x 28 in D Cabinet, Fixed Speed ECM Motor, 2.4 ton Tonnage, Hot Surface Ignition, Silicon Nitride Ignition

The high efficiency upflow gas furnace may be installed free-standing in a utility room, basement or enclosed in an alcove or closet. The extended flush jacket provides a pleasing "appliance appearance".

• 100% fired and tested all units and each component are tested on the manufacturing line
• Best packaging in the industry unique corner post design assures product will arrive to the homeowner dent-free
• 30 sec blower delay at start-up assures a warm duct temperature at furnace start-up
• Adjustable blower off settings (60 sec, 90 sec, 120 sec and 180 sec)
• 30 sec post purge increases life of heat exchanger
• Hot surface igniter innovative application of a silicon nitride-type igniter, utilizes proven SmartLite® technology
• Color-coded wire harness designed to fit the components, all with quick-connect fittings for ease of service and replacement
• Flexible category IV venting system may be vertically or horizontally vented using either a one-pipe or two-pipe system for maximum flexibility in installation
• High static blowers all models equipped with high static blowers
• Low boy height - easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install
• Tubular primary heat exchanger heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life
• 60 sec fixed cooling cycle blower off delay (TDR) increases cooling performance when matched with a Nortek Global HVAC coil
• Multi-speed direct drive blower - designed to give a wide range of cooling capacities, dip switches on PCB provide easy motor speed selection
• LP convertible simple burner orifice and regulator spring change for ease of convertibility
• Incorporates integrated control board with connections for electronic air cleaner and humidifier
• Two-piece door design enhances furnace appearance and uses captured screws to prevent losing door screws
• Blower compartment sealed door to reduce air leakage and insulated for ultra-quiet operation
• Sealed vestibule reduces burner and inducer sound levels
• Furnace air leakage - these furnaces comply with ENERGY STAR cabinet air leakage requirement of less than or equal to 2%, keep the conditioned air flowing to where it's needed
• PolyPro by DuraVent - these furnaces have been tested with and are approved to be installed with DuraVent's PolyPro venting system

Specifications