AireForce® KG7SC072DT35C1 Gas Furnace, 115 V, 3/4 hp, 92.1 % AFUE, Horizontal, Upflow, Gas

AireForce® Gas Furnace, Series: KG7SC, 72000 Btu/hr Input, 66000 Btu/hr Output, 115 V, 8.8 A, 3/4 hp Rating, 92.1 % AFUE, 60 Hz, 1 Stage, Horizontal, Upflow Configuration, NPT Connection Type, 1/2 in Connection, Gas, 5 Speed, 10 in Dia x 10 in W Blower, 34-1/2 in H x 21 in W x 28 in D Cabinet, 5-Tap Fixed Speed ECM Motor, 3.5 ton Tonnage, Hot Surface Ignition, 0.5 in-WC, 35 to 65 deg F Rise

The high efficiency upflow gas furnace may be installed free-standing in a utility room, basement or enclosed in an alcove or closet. Upflow/horizontal units come ready for upflow or horizontal application. The extended flush jacket provides a pleasing "appliance appearance". Design certified by CSA for application in Canada and the United States.

• 100% fired and tested all units and each component are tested on the manufacturing line
• Best packaging in the industry unique corner post design assures product will arrive to the homeowner dent-free
• 30 sec blower delay at start-up assures a warm duct temperature at furnace start-up
• Adjustable blower off settings (60 sec, 90 sec, 120 sec and 180 sec)
• 30 sec post purge increases life of heat exchanger
• Hot surface igniter innovative application of an appliance-type igniter with a 20 year history of reliability, utilizes proven SmartLite® technology
• Color-coded wire harness designed to fit the components, all with quick-connect fittings for ease of service and replacement
• Flexible category IV venting system may be vertically or horizontally vented using either a one-pipe or two-pipe system for maximum flexibility in installation
• High static blowers all models equipped with high static blowers
• Low boy height - easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install
• Tubular primary heat exchanger heavy gauge aluminized steel heat exchanger and stainless steel secondary heat exchanger assures a long life
• 90 sec fixed cooling cycle blower off delay (TDR) increases cooling performance when matched with a Nortek Global HVAC coil
• Multi-speed direct drive blower - designed to give a wide range of cooling capacities, dip switches on PCB provide easy motor speed selection
• LP convertible simple burner orifice and regulator spring change for ease of convertibility
• Incorporates integrated control board with connections for electronic air cleaner and humidifier
• Two-piece door design enhances furnace appearance and uses captured screws to prevent losing door screws
• Seated vestibule reduces burner and inducer sound levels
• Furnace air leakage - these furnaces comply with ENERGY STAR cabinet air leakage requirement of less than or equal to 2%, keep the conditioned air flowing to where it's needed
• PolyPro by DuraVent - these furnaces have been tested with and are approved to be installed with DuraVent's PolyPro venting system

Specifications