AireForce® FSH1BG Series FSH1BG4CVRX36K Ultra High Efficiency Heat Pump, 208/230 V, 17.50 A, 36000 Btu/hr BTU, 1/3 hp

AireForce® Ultra High Efficiency Heat Pump, FSH1BG Series, 208/230 V, 17.50 A, 1/3 hp, 60 Hz, 1 ph Phase, 36000 Btu/hr, 805 to 1200 cfm, 12.6 EER Rating, 19 SEER, 10 HSPF, Brazed Connection, Scroll Compressor, R-410A Refrigerant, 3/8 in Liquid Line, 1-1/8 in Suction Line, 35 A Fuse Rating, Inverter Drive, 71 dB Sound Level, Steel, Finish: Galvanized/Polyester Urethane-Coated, 41-1/4 in H x 31-3/4 in W x 31-3/4 in D, Additional Information: BLDC Motor

The iQ Drive® heat pump system features modulating compressor technology and variable speed indoor and outdoor fan motors. This system is controlled from a two-stage cooling and heating heat pump thermostat. The system has the capability of adding up to 18% of additional cooling/heating above the rated capacity. The B6VMAX air handler has de-humidification capabilities from the thermostat or duct mounted humidistat.

• IQ Drive® inverter driven Samsung rotary compressor provides five capacities in modulating operation from a two-stage thermostat
• Interface control board two-digit LED provides system operation, status and diagnostic troubleshooting information
• Suction accumulator protection from liquid flood back and future compressor failures
• Compressor and component access designed to make servicing easier for the contractor, hinge access panels are provided to all controls and the compressor
• High efficiency with the low sound levels up to 19 SEER with sound ratings of 58 to 73 depending upon operating conditions
• Compressor sound blanket engineered to significantly reduce unwanted compressor noise
• Variable speed condenser motor and swept-wing fan blade a heavy-duty brushless DC motor for long lasting reliability and engineered to provide quiet operation
• Requires no maintenance and is completely protected from rain and snow
• Common suction service port this port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability
• Discharge muffler reduces compressor noise and vibration
• High pressure switch protects against abnormally high system pressures
• Auto-reset feature prevents nuisance service visits
• Low pressure switch protects against loss of system refrigerant charge
• Liquid line filter drier included with unit, field installed
• Copper tube/aluminum fin coils outdoor coils are designed to optimize heat transfer and increase durability and reliability
• Composite base pan absorbs sound and is corrosion-resistant
• Composite pan is also stronger and lighter than steel
• Designed using galvanized steel with a polyester urethane coat finish, it passes 950 hr of salt spray per ASTM B117
• One-piece top/orifice designed for maximum airflow and quiet operation
• Removable top grille assembly allows ease-of service from the top without disconnecting fan motor leads

Specifications