AireForce® FG7TE080DV35C1 Gas Furnace, 115 V, 3/4 hp, 96 % AFUE, Upflow, Gas

AireForce® Gas Furnace, Series: FG7TE, 80000 Btu/hr Input, 77000 Btu/hr Output, 115 V, 9.3 A, 3/4 hp Rating, 96 % AFUE, 60 Hz, 2 Stage, Upflow Configuration, NPT Connection Type, 1/2 in Connection, Gas, 34-1/2 in H x 21 in W x 28 in D Cabinet, Variable Speed ECM Motor, 3.5 ton Tonnage, Hot Surface Ignition, Silicon Nitride Ignition, 0.5 in-WC, 35 to 65 deg F Rise

The high efficiency upflow gas furnace may be installed free-standing in a utility room, basement or enclosed in an alcove or closet. The extended flush jacket provides a pleasing "appliance appearance".

• Variable speed direct drive blower energy efficient brushless DC (ECM) motor controls airflow to provide better temperature control, humidity control and air distribution
• SmartLite® technology auto-adjusts igniter on time to extend igniter life
• Hot surface igniter innovative application of a silicon nitride-type igniter
• 30 sec blower delay at start-up assures a warm duct temperature at furnace start-up
• Adjustable blower off settings (60 sec, 90 sec, 120 sec and 180 sec)
• 30 sec post purge increases life of heat exchanger
• 60 sec fixed cooling cycle blower off delay (TDR) increases cooling performance when matched with a Nortek Global HVAC coil
• Color-coded wire harness designed to fit the components, all with quick-connect fittings for ease of service and replacement
• Diagnostic lights dedicated light for flame signal strength and two lights in combination to indicate all other fault codes with easy to recognize states without counting flashes
• Integrated control boards with connections for electronic air cleaner, humidifier and dehumidification
• Ergonomically located for ease of service
• Two-stage inducer optimizes efficiency on first stage heat and reduces sound levels
• Heat exchanger heavy gauge aluminized steel primary heat exchanger and stainless steel secondary heat exchanger assures a long life
• 100% fired and tested all units and each component are tested on the manufacturing line
• Best packaging in the industry unique corner post design assures product will arrive to the homeowner dent-free
• Flexible category IV venting system may be vertically or horizontally vented using either a one-pipe or two-pipe system for maximum flexibility in installation
• Low boy height - easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install
• LP convertible simple burner orifice and regulator spring change for ease of convertibility (as an accessory)
• Two-piece door design enhances furnace appearance and uses captured screws to prevent losing door screws
• Blower compartment sealed door to reduce air leakage and insulated for ultra-quiet operation

Specifications